facebook no script image
OnlineCarStereo.com is currently under maintenance. Please call 310-526-8635 if youre having problems placing your order.

JL Audio  SB-GM-VETC6/10W1v3

Stealthbox 10" 600W Peak Power Handling 2 Ohms, Single Voice Coil Component Car Subwoofer in sealed enclosure for 2005-2013 Chevrolet C6 Corvette

Item #46750

Condition:   Brand New

Product Highlights

  • Stealthbox 10" Subwoofer
  • 600W Peak Power
  • 2 Ohm Impedance
  • Single Voice Coil
  • Fits 2005-2013 Chevrolet C6 Corvette

  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

$1,149.99

Reg. Price $1,199.99  Save $50.00
Add Extended Warranty
  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

No Credit needed for acima logoLearn More

JL Audio Authorized Dealer

Huge Saving on Other items:


Huge Saving on Other items:


JL Audio Banner for Onlinecarstereo

JL Audio SB-GM-VETC6/10W1v3 Stealthbox 10" 300W RMS (600W Peak Power Handling) 2 Ohms, Single Voice Coil Component Car Subwoofer in sealed enclosure for 2005-2013 Chevrolet C6 Corvette


We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?
  • • 10" Stealthbox Single Voice Coil Component Car Subwoofer
  • • (1) 10W1v3-2 in a sealed enclosure
  • • (1) steel mesh grille
  • Owner's Manual

 


Why Choose JL Audio SB-GM-VETC6/10W1v3 Stealthbox System?


 

 

JL Audio SB-GM-VETC6/10W1v3 Stealthbox System Front Left Angled View
Performance is Simply Staggering

The sixth-generation Corvette is an amazing performance car, but it can definitely benefit from a major upgrade in the low-frequency department.

This Stealthbox® tucks neatly into the rear corner of the hatch and uses the storage pocket space to gain volume without taking up much hatch space and without interfering with targa top stowage.

The Hard Data: Contains one 10W1v3-2 in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs in driver-side corner of the hatch. A steel mesh grille is included to protect the Subwoofer. Does not affect storage of Targa Top or access to fuel door and emergency door release.

 

Advanced Engineering for Audiophile Precision

Unlike generic subwoofer boxes that muddy up your sound, the JL Audio SB-GM-VETC6/10W1v3 relies on advanced audio technology to deliver exceptionally clean, punchy bass.This specific configuration ensures your mica-injected polypropylene cone moves with absolute accuracy, keeping your music tight and precise even when pushed to its 300-watt RMS limit. To handle the high-vibration environment of a performance car, JL Audio added an integrated vented reinforcement collar and an elevated frame cooling setup, protecting the voice coil and eliminating distortion.

JL Audio SB-GM-VETC6/10W1v3 Stealthbox System Enclosure Installed View

 


Frequently Asked Questions (FAQ)


  • • Will this C6 Corvette Stealthbox fit perfectly into a Convertible or Grand Sport Convertible?
    No. This enclosure is custom-engineered exclusively for the rear hatch layout of 2005–2013 C6 Corvette Coupe and Z06 models. It will not physically fit convertible body styles.
  • • Which side of the rear hatch area does this 10-inch enclosure occupy?
    The fiberglass housing is molded precisely to drop down and latch into the driver-side rear corner storage cubby compartment of the trunk.
  • • Will installing this enclosure prevent me from locking my removable Targa top in the hatch?
    No. JL Audio custom-contoured the shell lines so it leaves the factory targa top mounting latches entirely unobstructed, allowing full roof storage.
  • • What factory safety or utility features inside the hatch will be blocked by the box?
    None. The layout ensures you maintain full, unobstructed access to the manual fuel door release cable and the emergency driver-side door pull override lever.
  • • What final wiring load impedance does this single 10-inch subwoofer present?
    The enclosure comes pre-loaded with a single 10W1v3-2 driver that is internally wired to the binding posts to present a final 2-ohm mono load to your amplifier.
  • • What continuous amplifier power rating is ideal to run this specific enclosure safely?
    The loaded 10W1v3 driver has a continuous power handling of 300 watts RMS. For ideal output and control, match it with a clean monoblock amplifier pushing 250W to 300W RMS at 2 ohms.
  • • Do I need to buy a speaker grille separately to protect the woofer from moving cargo?
    No. A heavy-duty, form-fitting black steel mesh grille is included in the package to protect the exposed up-firing woofer cone from loose gear.
  • • Why does the sub-bass output clip early or sound weak when tied into the factory Bose amp?
    The factory Corvette Bose amplifier employs internal equalization that heavily restricts low frequencies as volume increases. You must use an active integration adapter or processor to feed a clean, flat signal to your new amplifier.

 

Learn how to wire subwoofers


SPECIFICATIONS


  • Diameter : 10 Inch
  • Impedance : 2 Ohm
  • Peak Power Handling : 600 Watts
  • Number Of Subwoofers : 1
  • Vehicle Make : Chevrolet
  • RMS Power Handling : 300 Watts

FEATURES


Features:

  • High-Performance Subwoofer: One 10W1v3-2 subwoofer with injection-molded, mica-filled polypropylene cone, rubber surround, DMA-optimized motor design, and patented floating cone attach method for clean, precise bass.
  • Power Handling & Sensitivity: RMS 300 watts (recommended 75–300 watts RMS), wired to a 2-Ohm load with 11.0 mm Xmax and 83.9 dB sensitivity for distortion-free, efficient output.
  • Vehicle-Specific Fit: Designed for 2005–2013 Chevrolet C6 Corvette (excluding convertible models). Side-firing, sealed fiberglass enclosure installs neatly into the rear hatch corner without affecting Targa Top storage, fuel door access, or emergency release.
  • Durable & Secure Construction: Sealed fiberglass enclosure with steel mesh grille, binding post terminals, vented reinforcement collar, and engineered lead-wire system ensures reliability and secure installation.
  • Optional Matching Amplifier: Works seamlessly with JL Audio XD300/1v2 for optimized system performance.
  • OEM-Grade Finish: Color match grade excellent; available in all OEM colors for a stealthy, factory-like appearance.
  • Advanced Engineering Features: Insert molded suspension/coil/terminal sub-assembly and elevated frame cooling enhance power handling and sound quality.

 

Specifications:

  • Series: W1 v3 Series
  • Subwoofer Design: Round / Circle
  • Voice Coil(s): Single
  • Impedance (Per Voice Coil): 2?Ohms
  • RMS Power Handling: 300?W
  • Woofer Surround: Butyl Rubber
  • Woofer Composition: Mica-Injected Polypropylene (MIPP)
  • Sensitivity: 83.9?dB
  • Xmax: 11?mm
  • Subwoofer Size: 10"
  • Number of Subwoofers: 1
  • Box Style/Shape: Vehicle Specific
  • Number of Terminals: 1
  • Terminal Type: Binding Posts
  • Box Exterior Color: Gray
  • Box Finish: Carpet
  • Final Wired Impedance: 2?Ohms
  • Type of Enclosure: Loaded
  • Box Type: Sealed

 

  • UPC: 699440941365
  • Weight: 30
  • Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.

Do you own this product?

Write a review!
  • Perfect fit for my Corvette. A really true custom sub for an amazing car. Pricey but worth it.

    Darrel
    4/26/2024
free installation

Must haves for JL Audio SB-GM-VETC6/10W1v3:

Other items that might interest you:

Other customers also shopped for: